Most new iTel spreadrum devices seem not to flash normally with ResearchDownload and upgrade Download tools. It usually end with repartition error or stuck at flashing NV_WCN.
Well this guide will show you how to flash that stubborn iTel phone A11, A12, Prime4, A42 etc.
Download this spd factory download tool from (iTel hang on logo fix) here
Download latest version of Research download Tool (iTel flash stuck at system fix) here
The flashing process of these devices is in 2 phase. You can watch the video or follow tutorial below
1. Flash with Factory Download tool
Extract and launch factory download tool
Load the iTel pac file you want to flash
Click start button and connect device while holding volume down button.
FactoryDownload tool will detect the phone and download some files then stop at R_NV_W
At this point you are required to disconnect the phone from PC
Disconnect phone remove battery and connect again while holding volume down key
The tool will detect device and download some other files the stop again at FDL2 requiring you disconnect phone from PC
Disconnect phone remove battery and connect again while holding volume down key
Now phone will flash normally but stop at system
After about 10 seconds when it stuck, click stop button and disconnect phone from PC.
2. Flash device using Research Download Tool
Extract and launch Researchdownload tool
Load the pac file you used above
Click start button and connect phone while holding volume down key
Flashing process will start and and finish normal with no break points
Thats it, you have successfully fixed your stubborn iTel phone
Its to be noted that if you have iTel A11 or A12 that hangs on logo what is really necessary to flash and fix it is just the boot image. If you flash only the boot image, the phone will boot properly with all userdata still intact. I will do a tutorial soon on how to do just that so stay tune.
Hope this help
Like and Share
Then it comes with NO SERVICE, any solution?
ReplyDeleteThis comment has been removed by the author.
DeleteWhich phone do you have this no service error on and which firmware are you using
DeleteITel A12 No Service
Deleteand here is> ITel A11 No Service
look for working phone then backup the nvram with cm2spd and use it for ur NO SERVICE
Deletewrite nv file
DeleteNice work boss
ReplyDeletedon't work for itel prime 4, tool hang on check baud uart failed
ReplyDeleteit didint work on itel prime 4
ReplyDeleteIt didn't work on Itel 1409. It gives an error code=5008, failure to write file, followed by Load bin packet failed. Any help will be appreciated.
ReplyDeletePlease sir ITEL A series tools links is broken please upload thanks
ReplyDeleteLink is denied
ReplyDeleteAll links updated
ReplyDeleteCan not download
Delete
ReplyDeletehttp://www.mediafire.com/file/18o9a69y4216t4b/iTel_System_Flash_hang_fix.rar/file
Dangerous File Blocked !!
Super
ReplyDeleteI Have A12 Itel Version Can I Use This Discreption Links A,nt It Suit It ?
ReplyDeleteyes
Deletegood sir i have problem
ReplyDeleteWhat kind of problem?
DeletePour moi m'affiche ce message :CheckBaud erreur
ReplyDeletefinally worked for me Itel A11D
ReplyDeleteThe second tool has been removed... Please can help as with that
ReplyDeletepls help with the second tool on a11 thanks.
ReplyDeleteThank you so much! It works for me (Itel A11)
ReplyDeletei will be happy you get me the link to download the file plz
ReplyDeletePlease the second file have been removed from mediafire.
ReplyDeleteIs the second link as well important because it has been removed
ReplyDeleteAny solution?
second link has been removed
ReplyDeleteThis blog is so nice to me. I will keep on coming here again and again. Visit my link as well.. logo design company in Bangalore
ReplyDeleteitel A11 getting stuck on system in research download
ReplyDeleteTried this for my p33 but it still won't turn on
ReplyDeletethanks alot, work very well for itel A16 hang 0n logo
ReplyDeleteitel vision 1 pro L6502 flash failed
ReplyDelete