Note
Follow the instructions on how to
flash the device carefully below
I will not take responsibility on
whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the
exact ROM of the device you want to flash because
flashing a wrong preloader,
will make the device completely dead
(can't power on, can't charge and
will not be detected by a computer)
How to flash MTK devices using SP Flash Tool
Download,
latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
You
can also use other tools like WiseLink, SP
Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash
this device
TECNO Y3 PLUS QUICK SPECS
Android 4.4.2 (KitKat)
4-inch Touchscreen, 480 x 800 , IPS 233 ppi
1.0GHz dual-core Cortex A9 CPU
MT6577
SGX531u GPU
MT6577
SGX531u GPU
512MB RAM
8GB Internal Memory
Supports up to 32GB microSD
2 MP Rear Camera, LED Flash, Auto Focus
0.3 MP Front Camera
Dual SIM
EDGE / GPRS
WCDMA
WIFI 802.11 b/g/n
bluetooth 4.0
1800mAh Battery
Please Leave a comment after using this ROM
Report if you cannot download this file.
No comments:
Post a Comment